The 1017 Nu-Rail® Crossover Fitting attaches a 0.75 in. IPS pipe to another 0.75 in. IPS pipe. The most common use of the 1017 is on our 019ALU Crossarm. A listing of sensors commonly used with the 019ALU appears under the Compatibility tab.
Read MoreThe 1017 NU-RAIL® Crossover Fitting connects a vertical 3/4" IPS pipe to a horizontal 3/4" IPS pipe. It typically attaches a sensor with a 3/4” IPS pipe mount to a 019ALU crossarm.
The 1017 has two ovoid segments that are oriented at a 90° angle. Each segment accepts one piece of pipe allowing a vertical pipe to be secured to a horizontal pipe. The horizontal and vertical pipes are secured to the 1017 fitting using screws, which are tightened with an Allen wrench.
Dimensions | 6.35 x 8,89 x 7.62 cm (2.5 x 3.5 x 3.0 in.) |
Weight | 136.1 g (0.3 lb) |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
CM204 |
Product | Compatible | Note |
---|---|---|
014A-L | ||
03001-L (retired) | ||
03101-L | ||
05305-L | ||
27106T-L | ||
CM202 | ||
CM206 | ||
CSAT3 (retired) | ||
WINDSONIC1-ET | ||
WINDSONIC1-ETM (retired) | ||
WINDSONIC1-L | ||
WINDSONIC4-L | ||
WINDSONIC4-LC (retired) |
The 1017 compatible with sensors that have a 0.75 in. IPS pipe mount (1.05 in. OD).
The 1017 is compatible with user-supplied pipe that has a 0.75 in. IPS (1.05 in. OD).