The CM216 provides both a 3/4-inch IPS (1.05-inch OD) and a 1-inch IPS (1.32-inch OD) mounting pipe that extends 4 inches above the mast. They are pipes with an adapter that bolts to the inside of the top of a CM106B tripod; a stainless-steel CM110, CM115, or CM120 tripod; or a CM300, CM305, or CM310 mounting pole. A sensor with a 1.05- or 1.32-inch ID fitting (typically a wind sensor or the R. M. Young rain/snow gage) can then be mounted on this pipe.
Read MoreNote: The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods. |
Reach | Extends 10 cm (4 in.) above the mast |
Outer Diameter | 2.67 to 3.34 cm (1.05 to 1.315 in.) |
Pipe Size | 1.9 to 2.54 cm (0.75 to 1 in.) IPS |
Dimensions | 20.32 x 7.62 x 5.08 cm (8 x 3 x 2 in.) |
Weight | 952.54 g (2.1 lb) |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
CM106B-CSA | ||
CM110 | The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods. | |
QST6 |
Product | Compatible | Note |
---|---|---|
CM10 (retired) | ||
CM106 (retired) | ||
CM115 | The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods. | |
CM120 | The CM216 is not compatible with the aluminum versions of the CM110-series tripods, which were shipped prior to March 2007. The CM215 mount is intended for the aluminum tripods. | |
CM6 (retired) |
A lightning rod cannot be used when this mount attaches a Wind Monitor or a 03002 Wind Sentry atop the tripod’s mast. Therefore the CM216 is only recommended for mounting a Wind Monitor or 03002 if the deployment is short-term.
The CM216 is compatible with sensors that have a 0.75 or 1 in. size (1 or 1.32 in. OD) pipe mount.