This product is no longer available and has been replaced by: CM106B-CSA. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The CM10 is a galvanized-steel tripod that provides measurement heights up to 10 feet (3 meters) and support for attached sensors and mounts, solar panels, and environmental enclosures. The tripod legs are individually adjustable allowing adjustment of our wind set's measurement height, and tripod installation over uneven terrain.
Read MoreBenefits and Features
- Support for meteorological sensors, hydrological sensors, sensor mounts, solar panels, environmental enclosures
- Portable instrument mount
- Lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes, and UV-resistant cable ties included
Images
Technical Description
Constructed out of corrosion-resistant galvanized steel, the CM10 provides measurement heights of up to 10 ft (3 m). This general purpose instrument mount supports the attachment of sensors and mounts, solar panels, and environmental enclosures. Individually adjustable legs allow installation over uneven terrain. The CM10 includes lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes, and UV-resistant cable ties. An optional guy kit to improve the CM10’s wind load rating is also available.
Specifications
- Vertical Load Limit: 100 lbs (45 kg)
- Mast: 1.25 IPS (1.66 outer diameter)
- Leveling Adjustment: Slide collars on each leg adjust individuallyThe CM6 includes lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes, and UV-resistant cable ties.
- Leg Base: 2 in x 5 in with 0.5-in hole for ground stake
- Portability: Collapsible to 6-ft length by 9-in diameter
- Wind Load Recommendations
- 70 mph (unguyed); 120 mph (guyed CM10);
- Gust Tolerance: 100 mph (unguyed); 150 mph (guyed)
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Mounting Equipment
| Product | Compatible | Note |
|---|---|---|
| CM204 |
Additional Compatibility Information
Enclosure Brackets
The “-MM” mount option for our environmental enclosures is intended for mounting the enclosure to a tripod's mast. An enclosure ordered with this option will be shipped with a three-piece bracket mounted to the top of the enclosure and an identical three-piece bracket mounted to the bottom of the enclosure.