CM206 6 ft Crossarm with CM210 Bracket

Overview

The CM206 is a crossarm that attaches to an instrumentation tower or tripod. It provides a rugged, weather-resistant sensor mount for up to two sensors. The CM206 is compatible with our tripods and towers. It can be attached to a tripod mast or a user-supplied pole.

Read More

Images

The dark gray components are those included with the CM206. The lighter components are sold separately and demonstrate how the CM206 is used.
The dark gray components are those included with the CM206. The lighter components are sold separately and demonstrate how the CM206 is used.

Technical Description

The CM206 provides a rugged, weather-resistant sensor mount for one or two sensors. It consists of a 6-ft aluminum pipe and the CM210 mounting bracket kit. U-bolts included with the mounting bracket are used to attach the crossarm to a tripod mast, tower leg, or user-supplied vertical pipe (1.0” to 2.1” OD). All of our tripods and towers are compatible with the CM206. If the CM206 will be mounted on a tower, an additional CM210 bracket can be added so that the crossarm is secured to two of the three vertical risers within the tower.

A U-bolt mounting scheme allows the crossarm to be secured to the tripod or tower at the optimal measurement height for the sensor. The sensor is then mounted to the other end of the crossarm using a variety of mounts—depending on the sensor being deployed. The options available for mounting the sensor to the crossarm are listed as Common Accessories under the Ordering Info tab.

Specifications

Mounting Material 304 stainless-steel bracket with stainless-steel U-bolts and hardware
Crossarm Material 1 in. IPS anodized aluminum pipe
Pipe Outer Diameter 3.34 cm (1.315 in.)
Pipe Length 1.8 m (6 ft)
Weight 2.27 kg (5.0 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Mounting Equipment

Product Compatible Note
41303-5A
CM106B-CSA
CM110
CM221
CM225
RAD10
RAD10E
RAD14
UT10

Miscellaneous

Product Compatible Note
1017
1049
17953
18098
26120
27065
41003-5
41003-5A
41005-5
41303-5B
43502-L
CM10 (retired)
CM106 (retired)
CM115
CM120
CM220 (retired)
CM230
CM230XL
CM235
CM245 (retired)
CM255
CM255LS (retired)
CM6 (retired)
RAD06
UT20
UT30

Additional Compatibility Information

Campbell Scientific Tripod and Towers

This crossarm can also be attached to a user-supplied pole (1.0 in. to 2.1 in. OD).