The CM230 is an adjustable mount to point directional antennas or sensors at a specific target. The inclination can be adjusted to any angle from horizontal to vertical, supporting the use of upward-directed antennas or downward-directed infrared thermometers or snow-depth sensors.
The image shows a CM230 with poles to illustrate how the mount may be used.
Read MoreThe CM230 is typically attached to the mast of one of our tripods or towers, or in some applications to a user-supplied pipe (see Compatibility).
Material | 12 gage, 304 stainless steel |
Wind | Can withstand 241.4 kph (150 mph) wind with ice |
Dimensions | 7.62 x 9.53 x 8.89 cm (3.0 x 3.75 x 3.5 in.) |
Weight | 0.34 kg (0.75 lb) |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
CM204 |
The CM230 will accept antennas and sensors with a 1.0 in. to 1.5 in. outer diameter. The bracket can be attached to a mast or pipe with a 1.3 in. to 2.1 in. outer diameter. The declination of the antenna is fixed when the U-bolts attached to the tripod are tightened; the inclination of the antenna or sensor can then be adjusted with the other set of U-bolts and nuts.
The CM230 is compatible with a 0.75 to 1.0 in. pipe size (1 to 1.5 in. OD) on the adjustable-angle side and a 0.75 to 1.5 in. pipe size (1 to 2 in. OD) on the fixed-angle side.