Open-path eddy-covariance systems incorporate eddy-covariance techniques to calculate water vapor, carbon dioxide, and heat flux measurements. Customers purchase the individual components of the open-path eddy-covariance system.
Campbell Scientific’s EC150 is an open-path analyzer specifically designed for eddy-covariance flux measurements. As a stand-alone analyzer, it simultaneously measures absolute carbon-dioxide an...read more
Campbell Scientific’s IRGASON® fully integrates the open-path analyzer and sonic anemometer. Designed specifically for eddy-covariance carbon and water flux measurements, the patented design...read more
The CABLEPCBL-L is a 16 AWG, two-conductor cable with a Santoprene jacket. The conductors are stripped and tinned. This generic cable is used to power remote peripherals.read more
The CABLE4CBL-L is a 22-AWG, four-conductor cable with a Santoprene jacket and an aluminum Mylar shield. The conductors are stripped and tinned and have red, black, green, and white insulation colors....read more
The CABLE2TP-L is a two-twisted pair, 22 AWG cable that has a Santoprene jacket. Insulation colors of the twisted pairs are red/black and green/white. An aluminum Mylar shield is grounded via a drain...read more
The CABLE3TP is a three-twisted pair, 24 AWG cable that has a Santoprene jacket. Insulation colors of the twisted pairs are red/black, green/white, and blue/yellow. An aluminum Mylar shield is grounde...read more
The 26390 is offered for customers who want to perform their own zero and span. The zero and span should be done when ambient conditions change significantly (i.e., seasonally).
A similar service, the...read more
The 27278 is an aluminum stand that can be used to temporarily hold an IRGASON or EC150 head in its proper upright position, which is required while performing a zero and span procedure. This is conve...read more
The 10080 is a white thermocouple cover for the FW05, FW1, and FW3 connectors. This cover is placed over the Omega-brand thermocouple connectors and is used to mount the connectors to the side of the...read more
The HMP155A provides reliable relative humidity (RH) and temperature measurements for a wide range of applications. It uses a HUMICAP®180R capacitive thin film polymer sensor to measure RH over th...read more
The CM204 is a crossarm that attaches to an instrument tower or tripod. It provides a rugged, weather-resistant sensor mount for one or two sensors. The CM204 is compatible with our tripods and towers...read more
The 18048 is an aluminum, 3/4" IPS pipe that typically provides an attachment point for some sensors (e.g., the KH20, CSAT3). The 18048 is 12 in. long and is inserted in a CM220 Mount or a 1049 Nu-Rai...read more
The 1049 connects a 1 in. pipe to a 0.75 in. pipe. The 1049 is typically used to attach a sensor with a 0.75 in. pipe mount to a CM202, CM204, or CM206 crossarm. This usage provides functionality simi...read more
The 1017 Nu-Rail® Crossover Fitting attaches a 0.75 in. IPS pipe to another 0.75 in. IPS pipe. The most common use of the 1017 is on our 019ALU Crossarm. A listing of sensors commonly used with th...read more
