RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.
CFM100 CompactFlash Module
Services Available
Repair No
Free Support Yes

Overview

The CFM100 stores the data logger's data on a removable CompactFlash® (CF) card. The CFM100/CF card combination can be used to expand the data logger's memory, transport data/programs from the field site(s) to the office, and upload power up functions. The module connects to the 40-pin peripheral port on a CR1000 or CR3000 data logger.

Read More

Benefits and Features

  • Used to expand data storage of our CR1000 and CR3000 dataloggers
  • Connects to the data logger's peripheral port
  • Small, light-weight CF cards fit in your pocket for easy transport between the data logger and PC

Images

Technical Description

The CFM100 includes a card slot that can fit one Type I or Type II CF card. Only industrial-grade CF cards should be used with our products. Although consumer-grade cards cost less than industrial-grade cards, the consumer-grade cards are more susceptible to failure resulting in both the loss of the card and its stored data. Industrial-grade cards also function over wider temperature ranges and have longer life spans than consumer-grade cards.

Data stored on the card can be retrieved either by removing the card and carrying it to a computer or through a communications link with the datalogger. The computer can read the CF card either with the computer’s PCMCIA slot and the CF1 adapter or the computer’s USB port and the 17752 Reader/Writer.

CardConvert is used to convert and save binary data from a CompactFlash® card. CardConvert is included in our PC200W, PC400, LoggerNet, and RTDAQ datalogger support software.

Specifications

Storage Capacity 256 MB, 2 GB, or 16 GB
Typical Access Speed 200 to 400 kbits s-1
Memory Configuration User selectable; ring (default) or fill-and-stop
Power Requirements 12 V supplied through the data logger’s peripheral port
CF Card Requirements Industrial-grade
Temperature Range
  • -25° to +50°C (standard)
  • -55° to +85°C (extended)
Dimensions
  • 10.0 x 8.3 x 6.5 cm (4.0 x 3.3 x 2.6 in.)
  • 25.2 x 10.2 x 7.1 cm (9.9 x 4.0 x 2.8 in.) of CR1000 with CFM100 attached
Weight 133 g (4.7 oz)

Typical Current Drain
RS-232 Port Active
  • 30 mA (writing to card)
  • 20 mA (reading card)
RS-232 Port Not Active
  • 20 mA (writing to card)
  • 15 mA (reading card)
Low Power Standby 700 to 800 μA

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
21X (retired)
CR10 (retired)
CR1000 (retired)
CR1000X
CR10X (retired)
CR200X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR300
CR3000 (retired)
CR310
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR6
CR800 (retired)
CR850 (retired)
CR9000 (retired)
CR9000X (retired)

Mounting Equipment

Product Compatible Note
ENC10/12 Compatible when attached to the CR1000. The CFM100 is compatible with the CR3000 using the -NB option (base with no battery).
ENC12/14 Compatible when attached to the CR1000 or CR3000.
ENC14/16 Compatible when attached to the CR1000 or CR3000.

Miscellaneous

Product Compatible Note
ENC10/12R Compatible when attached to the CR1000 or CR3000.
ENC16/18 Compatible when attached to the CR1000 or CR3000.

Additional Compatibility Information

CompactFlash (CF) Cards

Campbell Scientific offers and recommends several CF cards (see Ordering tab). These cards have passed Campbell Scientific's ESD testing and operate properly with our data loggers.

Only industrial-grade CF card should be used with our products. Although consumer-grade cards cost less than industrial-grade cards, the consumer-grade cards are more susceptible to failure resulting in both the loss of the card and its stored data. Industrial-grade cards also function over wider temperature ranges and have longer life spans than consumer-grade cards.

Data Retrieval

Data stored on the card can be retrieved either through a communications link with the data logger or by removing the card and carrying it to a computer. The computer can read the CF card either with the computer's PCMCIA slot and the CF1 adapter or the computer's USB port and the 17752 Reader/Writer.

Data Logger Considerations

The CFM100 fastens onto the data logger's 40-pin peripheral port. This means that the CFM100 is only compatible with the CR1000 and CR3000. It is NOT compatible with the CR800, CR850, CR200X, CR5000, or CR9000X dataloggers.

To read cards with more than 2 GB of storage, the data logger operating system must be OS 25 or later.

Related FAQs

Number of FAQs related to CFM100: 19

Expand AllCollapse All

  1. How can data from a CompactFlash card be stored in several files so that each day has a new file?

    Review the CRBasic Editor Help for information on the TableFile() instruction.

  2. When is a file on the card of a CFM100 or NL115 open?

    The file on the card is open until the program is stopped or the button on the device is pressed.

  3. Can data be retrieved using a wireless connection while data is being stored to a memory card?

    Yes.

  4. What might cause the inability to transfer data from a datalogger to a memory card?

    If the CardOut() or TableFile() instructions are configured as fill and stop, the datalogger will stop writing data to the CompactFlash cards after they are full.

  5. Is it OK to insert a CompactFlash card that has old data on it into a CFM100 or NL115? Do CF cards always have to be reformatted or completely erased before inserting them into a device?

    The best practice is to format the CF card, not using “Quick Format” on a PC, before inserting it into a device.

  6. Is it possible to report CFM100 diagnostics in hourly transmissions so that any issues are detected promptly?

    The CFM100 does not have any diagnostics that can be reported. The Status table does report the status of the CompactFlash card and the number of bytes free on the CF card.

  7. What is the best way to collect data from a CompactFlash card in a CFM100?

    The best way to collect data from a CF card, with large or many files on it, is to physically remove the card and read the data from the card using a PC. Data can be collected using LoggerNet and a communications link; however, the link must use a high-frequency collection schedule. Some communications links are not practical because of speed or cost limitations.

  8. Using a CompactFlash module, a datalogger, and the BMP5 Direct SDK, how can data be downloaded from the memory card instead of the CPU buffer?

    Using the FileControl() instruction, the .dat files can be retrieved directly from the memory card. When data is collected by the standard method (not as downloaded files, but as streamed data) with a GetData() or similar instruction, the memory card is automatically used as a source of records to be returned when the internal CPU table no longer contains the oldest data. These records can be retrieved simply by using their record numbers.

  9. Why would a CompactFlash card that works fine in cameras and computer drives not work in a CFM100 or NL115?

    For detailed information, review the information in the “CF Card Information” application note.

  10. Does anything special need to be done in LoggerNet to retrieve data from the memory card in the CFM100?

    LoggerNet collects data from the datalogger first. If there is additional data on a CompactFlash card, LoggerNet collects that also. Nothing special needs to be set up in LoggerNet to have this occur.

Visit the FAQ Library

Case Studies

california: irrigation control
California: Irrigation Control
Alfalfa is a thirsty crop. It uses more than 20 percent of all of the......read more
Explore All Case Studies