Pyranometers / SP-LITE-L
RETIRED ›
This product is no longer available and has been replaced by: CS320,CS301. Some accessories, replacement parts, or services may still be available.
SP-LITE-L Solar Radiation Sensor
Services Available
Repair No
Free Support No

Overview

The SP-LITE is a rugged pyranometer manufactured by Kipp & Zonen. It measures incoming global solar irradiance using a silicon photovoltaic detector mounted in a cosine-corrected diffuser.

Images

Specifications

  • Light Spectrum Waveband: 400 to 1100 nm
  • Sensitivity: 10 µV W-1 m2
  • Temperature Range: -30° to 70°C
  • Diameter: 2.2” (55 mm)
  • Height: 1.3” (34 mm)
  • Weight: 6.4 oz (181 g)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
21X (retired)
CR10 (retired)
CR1000 (retired)
CR10X (retired)
CR200X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800 (retired)
CR800 (retired)
CR800 (retired)
CR850 (retired)
CR850 (retired)
CR850 (retired)
CR850 (retired)
CR9000 (retired)
CR9000X (retired)

Additional Compatibility Information

Data Logger Considerations

The SP-LITE uses one differential or single-ended analog channel.

Related Documents


Related FAQs

Number of FAQs related to SP-LITE-L: 2

  1. The information included on a calibration sheet differs with each sensor. For some sensors, the sheet contains coefficients necessary to program a datalogger. For other sensors, the calibration sheet is a pass/fail report.

  2. This depends on the information contained in the calibration sheet:

    • If the calibration sheet contains coefficient information, Campbell Scientific keeps a copy, and a replacement copy can be requested.
    • If the calibration sheet does not contain coefficients, Campbell Scientific does not keep a copy. It may be possible to contact the original manufacturer for a replacement copy.