Soil Volumetric Water Content Profiles / SEN12012
RETIRED ›
This product is no longer available and has been replaced by: SEN12512. Some accessories, replacement parts, or services may still be available.
This product is no longer available and has been replaced by: SEN12512. Some accessories, replacement parts, or services may still be available.
| Services Available |
|---|
Overview
The SEN12012 was an EasyAG II® probe with an SDI-12 interface and a 50-cm length. This probe provided water content profiles for cultivated soils of good tilth—commonly found in vegetable production areas. It was unsuitable for stony soils where the average stone size was larger than 10 mm.
The contemporary EasyAG probe is the SEN12512.
Images
Specifications
- Maximum Cable Length: 200 ft (60 m)
- Maximum Sensors per Standard Probe: 4
- Accuracy when Calibrated R²=0.89 based on field calibrations
- Measurement Range: Oven dry to saturation
- Operating Temperature Range -20° to +75°C
- Time to Read One Sensor: 1.1 seconds
- Sensor Diameter: 1.04" (2.65 cm)
- Access Tube Diameter: 1.26" (3.2 cm)
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR800 (retired) | ||
| CR800 (retired) | ||
| CR800 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | ||
| CR9000X (retired) |