This product is no longer available and has been replaced by: BPALK. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The PS12ALK typically provided a 12 V, 7.5 Ahr alkaline power supply for the CR500, CR510, CR10(X), and their peripherals.
Read MoreImages
Related Products
Technical Description
The PS12ALK typically provided a 12 V, 7.5 Ahr alkaline power supply for the CR500, CR510, CR10(X), and their peripherals. It was also used as a separate auxiliary 12 V power supply for remotely located sensor(s) or peripheral(s). However, to avoid errors in analog measurements and ground loops, the PS12ALK needed to share a common ground.
The PS12ALK replacement, the BPALK, is the less-versatile, but also less expensive. In contrast to the BPALK, the PS12ALK contained reverse input-protected charging circuitry for charging an external user-supplied battery from a solar panel. The internal alkaline cells in the PS12ALK could not be recharged.
Specifications
- Operating Temperature Range: -25° to +50°C
- Amp Hour Rating: 7.5 Ahr
- Output Voltage: 12 Vdc
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR10X (retired) | ||
| CR200X (retired) | ||
| CR211X (retired) | ||
| CR216X (retired) | ||
| CR23X (retired) | ||
| CR3000 (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR9000 (retired) | ||
| CR9000X (retired) |
Additional Compatibility Information
Enclosure Considerations
A desiccated, non-condensing environment is required. The PS12ALK includes built-in keyhole flanges for mounting to the backplate of a Campbell Scientific enclosure.