RETIRED ›
This product is no longer available and has been replaced by: CS215-L,HMP60-L. Some accessories, replacement parts, or services may still be available.
CS500-L Temperature and Relative Humidity Probe
Services Available
Repair No
Calibration No
Free Support No

Overview

The CS500 was a modified version of Vaisala's 50Y Humitter. The probe measured temperature with a 1000 Ohm platinum resistance thermometer (PRT) and relative humidity (RH) with a 50Y Intercap humidity sensor. The CS500 was cabled with our p/n 9720 cable.

Images


Specifications

  • Accuracy: ±3% over 10-90% RH; ±6% over 90-100% RH
  • Weight (w/ 6 ft cable): 0.1 lbs (0.05 kg)
  • Length: 2.66" (6.75 cm)
  • Diameter: 0.47" (1.2 cm)
  • Operating Temperature Range: -40° to +60°C

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Dataloggers

Product Compatible Note
21X (retired)
CR10 (retired)
CR1000 (retired)
CR10X (retired)
CR200X (retired)
CR211X (retired)
CR216X (retired)
CR23X (retired)
CR3000 (retired)
CR500 (retired)
CR5000 (retired)
CR510 (retired)
CR800 (retired)
CR850 (retired)
CR9000 (retired)
CR9000X (retired)

Additional Compatibility Information

Mounting

The CS500 is typically housed in a 41303-5A 6-plate naturally aspirated shield.

It may also be housed in a 41003-5 10-plate shield if additional hardware is used. A 41322 Adapter Plate allows the HMP50 to be mounted in the lower part of the 41003-5 10-plate shield. Alternatively, a 41381 extension tube and the 6637 split nut plug can be used to mount the CS500 in a higher part of the 41003-5; the pn 41381 cable is also required.

Both the 41303-5A and the 41003-5 attach to a crossarm, mast, or user-supplied pipe with a 1.0-in. to 2.1-in. outer diameter.