Solar Panels / SP370-L
SP370-L 370 W Solar Panel
Our Most Powerful Solar Panel
For remote systems or systems with large power requirements
weather applications supported water applications supported energy applications supported gas flux & turbulence applications supported infrastructure applications supported soil applications supported

Overview

The SP370-L 370 W Solar Panel is a photovoltaic power source capable of recharging batteries. It is used in systems that require high-power solar panels. The SP370-L allows unattended operation of systems in remote locations, far from ac electrical sources. The cable length for the solar panel is user-selectable.

For ease with mounting the solar panel to the mast and leg braces of a CM106B tripod, mounting hardware is available as an accessory item. 

Images

SP370-L
SP370-L
SP370-L
SP370-L Solar Panel attached to the 34493 Mounting Kit (sold separately)
SP370-L Solar Panel attached to the 34493 Mounting Kit (sold separately)

Specifications

Maximum Peak Power 370 W
Current at Peak Ipmax 9.69 A
Voltage at Peak Vpmax 38.34 Vdc
Maximum Surface Load (wind/snow)
  • 4000 Pa (83.5 psi) rear load
  • 5400 Pa (112.8 psi) front load
On-board Regulator Included No
Dimensions 1,795 x 990 x 38 mm (70.7 x 39.0 x 1.5 in.)
Weight 19 kg (41.9 lb)

Compatibility

Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.

Power Supplies

Product Compatible Note
38898 Slightly undersized for peak production.
CH201 Undersized for peak production.
PS150

Mounting Equipment

Product Compatible Note
CM106B-CSA
CM110 Will mount to the main legs of the tripod instead of to the leg braces as on the CM106B.
QST6
UT10 The hardware included with the SP370-L is for use with the CM106B. The U-bolts will fit the UT-series products, but they are oversized.
UT6 The hardware included with the SP370-L is for use with the CM106B. The U-bolts will fit the UT-series products, but they are oversized.
UTHD The hardware included with the SP370-L is for use with the CM106B. The U-bolts will fit the UT-series products, but they are oversized.

Miscellaneous

Product Compatible Note
CH150
CM115 Will mount to the main legs of the tripod instead of to the leg braces as on the CM106B.
CM120 Will mount to the main legs of the tripod instead of to the leg braces as on the CM106B.
PS200
UT20 The hardware included with the SP370-L is for use with the CM106B. The U-bolts will fit the UT-series products, but they are oversized.
UT30 The hardware included with the SP370-L is for use with the CM106B. The U-bolts will fit the UT-series products, but they are oversized.

Additional Compatibility Information

The SP370-L is compatible with Concorde Sun Xtender series (such as BP84) or flooded batteries.

Related Documents

Product Brochures