Back To Update List

LoggerNet Patch 4.8
Updated: 26-03-2024

  1. LoggerNet - (Major) Added the ability to turn Automatic Update checks on or off.
  2. LoggerNet - (Major) Fixed an issue where LoggerNet could shut down exceptionally slowly.
  3. LoggerNet - (Major) Changed the install so it doesn’t update RTMC if a pre-5.0 version of Pro is installed.
  4. LoggerNet - (Feature) Added standalone support for the CR350. Previously, it was included as a part of the CR300 Series loggers.
  5. LoggerNet - (Feature) Added default file filter for programs on the CR350 (.CRB). Updated CR300 filter to show both .CR300 and .CRB by default.
  6. LoggerNet - (Feature) Added a new log file called "FTPLastTx.log" that provides details about the last FTP task that was run. It will be overwritten with each FTP event.
  7. Setup - (Major) Removed IPManager settings.
  8. Setup - (Major) Fixed a Setup Screen crash that occurred when switching views.
  9. Connect - (Moderate) Fixed an issue in the file control screen where some information would update when a Datalogger program was sent from another application, but other information wouldn't.
  10. Connect - (Moderate) Fixed a bug where the currently collected table wasn't saved with the correct timestamp filename when using "Custom Collection".
  11. ViewPro - (Moderate) Fixed a clipping issue where text on minimal width columns would overwrite the next column.
  12. ViewPro - (Minor) Inside TOB1 files, Booleans now show up as true/false instead of as -1/0.
  13. ViewPro - (Feature) Added legend gradient controls to the line graph properties form. These settings are also included to the saved defaults.
  14. ViewPro - (Feature) When record numbers aren’t sequential, they are now separated with a horizontal black line. The record after the line has a cream-colored highlight. This setting can be turned off manually.
  15. Troubleshooter - (Moderate) Fixed an "Out of Memory" error that occurred when the Troubleshooter was already open and the Connect screen failed to connect to a datalogger directly.
  16. LogTool - (Feature) Added the ability to sort stations alphabetically.
  17. RTMC - (Moderate) Removed the grey workplace border that displays around projects in Run-time.
  18. RTMC - (Feature) Added functionality to allow the user to change subcomponent names.
  19. Short Cut - (Major) All bridge measurements now check for channel adjacency.
  20. Short Cut - (Moderate) Changed Modbus Master/Slave terminology to Client/Server.
  21. Short Cut - (Moderate) Added C1-2 and SE1-4 as additional terminals for switch closure measurements on the CR350 datalogger.
  22. Short Cut - (Minor) Fixed a bug where 4-20mA generated CRBasic code didn’t match the wiring diagram.
  23. Short Cut - (Feature)Added support for the following sensors: Wintersense Road Surface Temperature Sensor, TempVue10 (4-wire) Temperature Probe, TempVue20 (SDI-12) Temperature Probe, TempVue50 (SDI-12) Water Temperature Probe, SnowVue10 Digital Snow Depth Sensor, CS320 Digital Thermopile Pyranometer (SN>3505).
  24. CRBasic Editor - (Moderate) Fixed an issue were jumping to a subroutine (Ctrl+Y or blue arrow on the toolbar) could find the wrong subroutine if the full name and params are a subset of a different subroutine.
  25. CRBasic Editor - (Feature) Using the Goto Navigation menu (Ctrl+G or green arrow on the toolbar), the subroutine options now also include functions.
  26. DevConfig - (Major) Added the ability for DevConfig to automatically check for updates if the user allows it.
  27. DevConfig - (Major) Changed the .csipasswd format so that an "admin" is no longer created by default, nor is it required.
  28. DevConfig - (Minor) Added an evaluator to check passwords for certain conditions to consider it a strong password.
  29. DevConfig - (Minor) Replaced all references to the RF451 model with RF451/RF452 to reflect support for the new Freewave radio module.
  30. DevConfig - (Minor) Default directory used for storing config files now references "\\AppData\\AppLocal" instead of roaming.
  31. DevConfig - (Feature) Added the Security Check tab for PakBus dataloggers that displays the results of a security audit and provides links to the panel/subpanel that has a control associated with the setting.
  32. DevConfig - (Feature) Added a new button to the collect data panel that provides a short cut to unselect all tables.
  33. DevConfig - (Feature) Added support for the SPECTRUM 100, SDM-SIO2R, CR350-RF452/CR350-CELL230 devices, as well as a CR6/CR1000X with an attached cell modem.
×