Relay Drivers / REL10
REL10 Relay Driver (maximum 10A)

Overview

Relay which allows switching of high current (up to 10A) loads by a datalogger.

If switching smaller loads (up to 2A), please refer to the REL02.

Images

Specifications

  • Operating Voltage: 12Vdc nominal (9.0 to 15 Vdc)
  • Current Drain at 12Vdc: 84mA
  • Relays: single pole double throw, break before make
  • Contact Material: AgSnO2
  • Coil Resistance: 63Ω ±10% (at 20°C)
  • Contact Ratings: 10A @ 26Vdc and Vac
  • Release/Actuation Time: 5ms (excluding contact bounce time, without diode)
  • Operating Temperature: - 40°C to + 85°C
  • Humidity: 5 to 85%RH
  • Dimensions including switches and mounts: 92 x 27 x 47 mm

Expected Life (contact closures)

  • Mechanical: 107 (at 180 times/min)
  • Electrical: N.O.: 105 ; N.C.: 5 X 104 (at 20 times/mi)

Compatibility

Compatible Contemporary Dataloggers

  • CR6
  • CR300
  • CR310
  • CR350
  • CR800
  • CR850
  • CR1000X
  • Granite Series








Compatible Retired Dataloggers

  • CR7X
  • CR10
  • CR10X
  • 21X
  • CR23X
  • CR200(X) Series
  • CR500
  • CR510
  • CR1000
  • CR9000
  • CR9000X
  • CR9000XC

Note:

Mounting holes are compatible with an imperial enclosure only