Relay Drivers / OPTO22-DC60S5
Overview
The OPTO22-DC60S5 is a 60 VDC, 5 Amp, DC Control Solid State Relay.
Images
Specifications
- Operating Voltage Range: 5–60 VDC
- Forward Voltage Drop: 1.5 volts at 5 amps
- Nominal Currrent Rating: 5 amps
- Off-State Blocking: 60 VDC
- Signal Pickup Voltage: 3 VDC 32 Volts allowed
- Signal Dropout Voltage: 1 VDC
- Signal Input Impedeance: 1,000 ohms
- 1 Second Surge: 10 amps
- Operating Temperature Range: –40 °C to 100 °C
- Isolation Voltage: 4,000 VRMS
- Off-State Leakage: 1 mA maximum
- Turn-on Time: 100 usec
- Turn-off Time: 750 usec
NOTE: When controlling an inductive load, like a solenoid or coil, a commutating diode must be used. Install the commutating diode across the terminals of the load (not the SSR terminals). This will protect the SSR from damage caused by voltage spikes when turning off the load.