World's leading small solar controller
Perfect for a variety of industries.
Perfect for a variety of industries.
Overview
The REGSS-10A-12V allows you to connect a solar panel 12Vdc and a battery 12Vdv to prevent an overcharge the battery.
Read MoreBenefits and Features
- Full Electronic Protections
- Longer Battery Life
- Multi-colour status LED
- 3 LED's for battery state of charge
- Dead battery recovery
- Telecom mode for sensitive loads
- Maximum charge limiting for sensitive loads
- Cover to protect wire terminals
Images
Technical Description
Supply voltage from the solar panel is connected to the Solar Cell terminal. Regulated voltage to charge the data logger’s sealed rechargeable power supply are sourced from the Battery terminal.
Compatibility
Datalogger Considerations
Compatible Contemporary Dataloggers
| CR200 Series | CR800/CR850 | CR1000 | CR3000 | CR5000 | CR7X | CR9000X |
 |
|
|
|
|
|
Compatible Retired Dataloggers
| CR500 | CR510 | CR10 | CR10X | 21X | CR23X | CR9000 |
|
|
|
|
|
|
|
Note:
Mounting holes are compatible with an imperial enclosure only
Specifications
Electrical
- Max PV and Load Ratings: Solar Current - 10A, Load Current - 10A, LVD - Yes
- System Voltage: 12 volts
- Min. battery voltage: 1 volt
- Regulation voltage: 12 volts, Sealed Battery - 14.1 V, Flooded Battery - 14.4 V
- Load Disconnect: 11.5V
- LVD Reconnect: 12.6 V
- Max. solar voltage: 30 volts
- Load in-rush capability: 65 amps
- Self-consumption <8 mA
- Voltage Accuracy: +/- 25 mV (typical)
- Transient surge protection: 1500W per connection
Mechanical
- Wire size: 5 mm2 / #10 AWG
- Weight (unpacked): 0.23kg / 8 oz.
- Dimensions: 15.2 5.5 x 3.14cm
Environmental
- Ambient temperature: -40°C to +60°C
- Storage temperature: -55°C to +80°C
- Humidity: 100% non-condensing
- Tropicalisation: Epoxy encapsulation, marine rated terminals, anodized aluminium case
Electronic Protections
- Solar: Overload, short-circuit, high voltage
- Load: Overload, short-circuit, high voltage
- Batter: High voltage
- All: Reverse polarity, high temperature, lightning and transient surgers
- Reverse current at night
Battery Charging
- Charging method: 4 Stage series PWM
- Charging stages: Bulk, absorption, float, equalise
- Temperature compensation: Coefficient - -30mV/°C, Range - -30°C to +60°C, Set points - Absorption, float, equalise
LED Indications
- Status LED (1): Charging or not charging, solar error conditions
- Battery LED (3): Battery Level, Charging Stage