Overview
The 9598 is a replacement relative humidity chip for the HMP60, HMP50, and CS500 temperature and relative humidity probes. Users can replace this chip in the field, eliminating the downtime typically required for the recalibration process.
Read MoreImages
Technical Description
The 9598 provides a replacement RH chip and filter cap for an HMP60, HMP50, or CS500 temperature and RH sensor. The 9598 is plugged into a socket underneath the end cap and filter assembly. Please note that there is a small bump that acts as a standoff between the RH chip and the temperature circuit. The chip should be inserted so that the bump faces the temperature circuit.
Specifications
| Dimensions | 10.2 x 2.5 x 1.3 cm (4.0 x 1.0 x 0.5 in.) |
| Weight | 22.68 g (0.05 lb) |
Compatibility
Listed Under
Replacement Part for the following products:
- HMP60-ETR - Temperature/RH probe for ET Station, with R.M. Young Shield Adapter
- HMP60-ETS - Temperature/RH Probe for ET Station, with MetSpec Shield Adapter
- 26999 - Temperature/RH Probe for ET Station
- HMP60-L - Temperature and Relative Humidity Probe
- HMP50-L - Temperature and Relative Humidity Sensor
- CS500-L - Temperature and Relative Humidity Probe