The SG000 is an optical-coincidence lightning sensor that detects actual lightning strikes for up to 20 miles away. Available as an option for our CS110 Electric Field Meter, the SG000 Strike Guard is...read more
This DTE RS-232 cable terminates with a 9-pin pin (male) DTE port and handles serial communication between the CS110 and devices with RS-232 DCE ports (9-pin socket [female]). This would include most...read more
The CS110CBL2-L provides a CS I/O cable for the CS110 Electric Field Meter. This cable handles serial communication between the CS110 and a Campbell Scientific peripheral device such as the COM220, CO...read more
The CS110CBL3-L is required for the CS110 to operate. One end of the cable terminates in a military-style connector, and the other end terminates in pigtails. The connector attaches to the bulkhead-mo...read more
The 17642 Zero Electric Field Cover is used to determine if the CS110 needs cleaning. Place the 174642 over the CS110's shutter while the field meter is deployed in its typical downward-facing orienta...read more
The 14291 power cable terminates in a barrel plug on one end for connection to a MD485, SC532A, RF400-series radio, or RF450 radio, and two pigtails for connection to the 12V and GND terminals of a po...read more
This kit is used to mount an SC105, SC932A, SC532A, or SC32B to an enclosure backplate. Components of the 16987 include a mounting bracket, a Velcro strap, and screws.read more
This 1 ft, null modem cable has 9-pin connectors on both ends for connecting the datalogger's RS-232 port to a peripheral's RS-232 port. An interface such as the SC105 or SC932A is typically not requi...read more
The FC100 is designed for use with the SG000 Strike Guard lightning detector as part of the CS110 and LW110 lightning warning systems. The SG000 outputs its data signal via fiber-optic cable, and the...read more
The FC100CBL1-1 is a simplex PMMA plastic fiber optic cable that connects the FC100 Fiber Optic Converter with the SG000 Strike Guard. Simplex cables support one-way communication.
The SG000 Strike G...read more
The FC100CBL2-1 is a duplex PMMA plastic fiber optic cable that connects the FC100 Fiber Optic Converter with the SG000 Strike Guard. Duplex cables support two-way communication.
The SG000 Strike Gua...read more
The SC932A supports two-way communications between a datalogger and a device that is configured with an RS-232 DCE serial port. Common Campbell Scientific devices used with the SC932A include our SRM-...read more