Overview
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.
Read MoreImages
Related Products
Technical Description
These grommets along with the 505 screws are commonly used together to secure our equipment to the backplates of our enclosures.
Specifications
| Dimensions | 0.97 x 0.97 x 0.97 cm (0.38 x 0.38 x 0.38 in.) |
| Weight | 4.54 g (0.01 lb) |
Listed Under
Replacement Part for the following products:
- 27758 - BP12 Secured Mounting Kit
- NL241 - Wireless Network Link Interface
- VOLT116 - 16- or 32-Channel 5V Analog Input Module
- VWIRE305 - 8-Channel Dynamic Vibrating Wire Analyzer
- SDM-IO16A - 16-Channel Input/Output Module
- CS231-L - SDI-12 Temperature Profiler
- TEMP120 - 20-Channel Thermocouple Module
- 28960 - Enclosure Stack Mounting Kit
- VOLT108 - 8- or 16-Channel 5V Analog Input Module
- 39086 - 6 in. DIN Rail Mounting Kit
- ALK7 - 12 V, 7 Ah Alkaline Battery Pack (requires 8 D cell batteries)
- SDM-SIO4A - Four-Channel Serial I/O Module
- 33447 - BP24 Mounting Kit
- 40294 - Horizontal, Grid-Mount Strain-Relief Kit
- 28517 - Wiring Duct with Cover Kit, 12 x 1.26 in.
- DAQCASE15 - Data Acquisition (DAQ) Laboratory and Field Case
- CH201 - 12 V Charging Regulator
- SVP100 - Surge Voltage Protector DIN Rail with Mounting Hardware
- GRANITE9 - Measurement and Control Data-Acquisition System
- GRANITE10 - Measurement and Control Data-Acquisition System
- RF411A - 922 MHz Spread-Spectrum Radio
- GRANITE6 - Measurement and Control Data-Acquisition System
- CR310 - Data Logger with Ethernet
- CELL220 - 4G LTE CAT1 Cellular Module for Australia and New Zealand
- ENCTDR100 - Enclosure to Hold Datalogger, SDMX50SP, and TDR100
- SDM-CD16ACA - 16-Channel AC/DC Relay Controller
- RF451 - 900 MHz 1 W Spread-Spectrum Radio
- RF412 - 922 MHz Spread-Spectrum Radio
- 36331 - BP84 Mounting Kit with Cables
- BAROVUE10 - Digital Barometer
- CR800 - Measurement and Control Data Logger
- RF427 - 905 MHz + 920 MHz Spread-Spectrum Radio
- CRVW3-NE - 3-Channel Vibrating-Wire Datalogger without Enclosure
- CR850 - Measurement and Control Datalogger with Keyboard
- CR1000Xe - Measurement and Control Datalogger
- CR1000X - Measurement and Control Data Logger
- CR-PVS1 - Soiling Index RTU for Photovoltaic Modules
- 7363 - Enclosure Supply Kit
- 32477 - Enclosure Supply Kit, Small Size
- CR1000 - Measurement and Control Data Logger
- CR350 - Measurement and Control Datalogger
- BP24 - 24 Ah 12 V Sealed Rechargeable Battery with Mounts
- BP12 - 12 Ah 12 V Sealed Rechargeable Battery with Mounts
- TX325 - Satellite Transmitter for GOES CS2/v2.0
- TX326 - Satellite Transmitter for Meteosat
- CDM-A116 - 16-Channel 5 V Analog Input Module
- CR6 - Automated Monitoring Platform
- CR300 - Measurement and Control Datalogger
- AVW100 - Interface for Vibrating-Wire Sensors
- SDM-SW8A - 8-Channel Switch Closure Input Module
- 22238 - PS200 12 V Power Supply with Charging Regulator but without Battery
- AM25T - 25-Channel Solid-State Multiplexer
- LR4 - 4-Channel Latching-Relay Module
- AL200 - ALERT2 Encoder, Modulator, and Sensor Interface
- PS200 - Power Supply with Charging Regulator and Rechargeable Battery
- SDM-CD8S - 8-Channel Solid-State DC Controller
- 31551 - Enclosure Leg Stack Mounting Kit
- CE4 - 4-Channel Current-Excitation Module
- SDM-CD8S - 8-Channel Solid-State DC Controller
- COM320 - Voice Phone Modem
- AVW216 - 2.4 GHz Wireless 2-Channel Vibrating Wire Analyzer Module
- MD485 - RS-485 Multidrop Interface
- AVW200 - 2-Channel Vibrating-Wire Interface
- SDM-AO4A - 4-Channel Analog Output Module
- CE8 - 8-Channel Current-Excitation Module
- SVP48 - Surge Voltage Protector Bracket
- SDM-IO16 - 16-Channel Input/Output Module
- SDM-CD16S - 16 Channel Solid State DC Relay Controller
- SDM-CD16AC - 16-Channel AC/DC Relay Controller
- RF500M - Radio Modem
- A6REL-12 - 6-Channel Relay Driver with Manual Override
- CS100 - Barometric Pressure Sensor
- CS106 - Barometer
- SDM8X50 - 8-Channel 50 Ohm Coaxial Multiplexer for TDR Systems
- DB1 - Double Bubbler Liquid Level Sensor
- A547 - Conductivity Interface for CS547A-L
- CS470 - Compact Bubble Water Level Sensor, Standard Accuracy
- SDS122 - CSL Two-Way Serial Data Switch
- PS150 - 12 V Power Supply
- CR211X - Datalogger with 922 MHz Spread-Spectrum Radio
- RF310M - RF Modem
- CH150 - 12 V Charging Regulator
- CS471 - Compact Bubble Water Level Sensor, High Accuracy
- SDM-AO4 - Analog Output Module
- BPALK - 12 V Alkaline Battery Pack
- CR216X - Datalogger with 2.4 GHz Spread-Spectrum Radio
- AM16/32A - 16-channel or 32-channel Relay Multiplexer
- CS105 - Vaisala PTB101B Barometer
- CS115 - Druck Barometric Pressure Sensor
- SC-CPI - Datalogger-to-CPI Interface
- AVW211 - 922 MHz Wireless 2-Channel Vibrating Wire Analyzer Module
- CR510 - Basic Datalogger
- 17057 - PS100 12 V Power Supply with Charging Regulator but without Battery
- CWB100A - 922 MHz Wireless-Sensor Base for Australia
- CR500 - Basic Datalogger
- CH100 - 12 V Charging Regulator
- SDM-CVO4 - 4-Channel Current and Voltage Output Module
- MD9 - Coax Multidrop Interface
- SDM-SIO1 - 1-Channel Serial Input/Output Module
- NL100 - Network Link Interface
- SDM-SIO4 - 4-Channel Serial I/O Module
- PS100 - Power Supply with Charging Regulator and Rechargeable Battery
- RF450 - 900 MHz, 1 W Spread-Spectrum Radio
- SDM-CD16D - 16-Channel Digital Control Port Module
- CR510-2M - Basic Datalogger with 2M Additional Memory
- AM16/32B - 16- or 32-Channel Relay Multiplexer
- PS12ALK - Alkaline Power Supply
- LLAC4 - 4-Channel Low-Level AC-Conversion Module
- BP7 - 12 V 7 Ah Sealed Rechargeable Battery with Mounts and Pigtail
- 25458 - 5 in. DIN Rail Mounting Kit
- SDM-CAN - Datalogger-to-CANbus Interface Module
- COM220 - Phone Modem
- CR211 - Datalogger with 922 MHz Spread-Spectrum Radio
- AVW4 - Interface for Vibrating-Wire Sensors
- CR200 - Datalogger
- CR216 - Datalogger with 2.4 GHz Spread-Spectrum Radio
- CR200X - Datalogger
- NL240 - Wireless Network Link Interface
- FC100 - Fiber Optic Converter
- AVW1 - Interface for Vibrating-Wire Sensors
Ships with the following:
- REL02 - Relay Driver (maximum 2A)
- REL10 - Relay Driver (maximum 10A)
- COM320 - Voice Phone Modem
- CR1000WP - Wiring Panel for CR1000
- FC100 - Fiber Optic Converter
- LLAC4 - 4-Channel Low-Level AC-Conversion Module
- BP24 - 24 Ah 12 V Sealed Rechargeable Battery with Mounts
- BP7 - 12 V 7 Ah Sealed Rechargeable Battery with Mounts and Pigtail
- BP12 - 12 Ah 12 V Sealed Rechargeable Battery with Mounts
- 7363 - Enclosure Supply Kit
- BPALK - 12 V Alkaline Battery Pack
- ENCTDR100 - Enclosure to Hold Datalogger, SDMX50SP, and TDR100
- RF500M - Radio Modem
- A547 - Conductivity Interface for CS547A-L
- CE8 - 8-Channel Current-Excitation Module
- CE4 - 4-Channel Current-Excitation Module
- AM25T - 25-Channel Solid-State Multiplexer
- AM16/32B - 16- or 32-Channel Relay Multiplexer
- AVW200 - 2-Channel Vibrating-Wire Interface
- AVW216 - 2.4 GHz Wireless 2-Channel Vibrating Wire Analyzer Module
- COM220 - Phone Modem
- CS100 - Barometric Pressure Sensor
- CS106 - Barometer
- SDM-CD16S - 16 Channel Solid State DC Relay Controller
- SDM-CD8S - 8-Channel Solid-State DC Controller
- MD485 - RS-485 Multidrop Interface
- PS200 - Power Supply with Charging Regulator and Rechargeable Battery
- SDM-AO4A - 4-Channel Analog Output Module
- 22238 - PS200 12 V Power Supply with Charging Regulator but without Battery
- SC-CPI - Datalogger-to-CPI Interface
- NL201 - Network Link Interface
- RF411A - 922 MHz Spread-Spectrum Radio
- CR6 - Automated Monitoring Platform
- CS225-L - SDI-12 Temperature Sensor String
- CR300 - Measurement and Control Datalogger
- CS231-L - SDI-12 Temperature Profiler
- VWIRE305 - 8-Channel Dynamic Vibrating Wire Analyzer
- VOLT108 - 8- or 16-Channel 5V Analog Input Module
- VOLT116 - 16- or 32-Channel 5V Analog Input Module
- TEMP120 - 20-Channel Thermocouple Module
- CR1000X - Measurement and Control Data Logger
- GRANITE6 - Measurement and Control Data-Acquisition System
- BAROVUE10 - Digital Barometer
- SDM-CD16ACA - 16-Channel AC/DC Relay Controller
- CR1000Xe - Measurement and Control Datalogger