This product is no longer available. Some accessories, replacement parts, or services may still be available.
| Services Available |
|---|
Overview
The 10437 PROM allows the CR7 to be compatible with the SDM-INT8, SDM-SW8A, SDM-AO4, and SDM-CD16AC. It is the OS7-0:2 default option.
Read MoreImages
Technical Description
The 10437 PROM allows the CR7 to be compatible with the SDM-INT8, SDM-SW8A, SDM-AO4 and the SDM-CD16AC. It is the OS7-0:2 default option.
PROMs can be installed by the customer or at our factory; if factory-installed, an RMA (Return Material Authorisation) is required. List prices is for the PROM only. Please note that several units may be sent in on one RMA number. An additional service charge (one hour minimum) will be applied to each RMA.
Campbell Scientific strongly recommends that units sent to the factory go through a standard checkout. In most cases, Data Logger Recalibration and Extended Temperature Testing should also be considered.
Data loggers can be sent to our factory for installation of a PROM upgrade.
Standard checkout of the unit following a PROM upgrade is strongly recommended; this process includes the technician confirming operation of the data logger's Operating System and I/O channels by several methods and over the standard operating temperature range. Hourly charges apply.
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Miscellaneous
| Product | Compatible | Note |
|---|---|---|
| SDM-AO4A | ||
| SDM-CAN (retired) | ||
| SDM-CD16AC (retired) | ||
| SDM-CD16D (retired) | ||
| SDM-CD16S | ||
| SDM-CD8S | ||
| SDM-CVO4 (retired) | ||
| SDM-INT8 (retired) | ||
| SDM-IO16 (retired) | Output only | |
| SDM-SIO1 (retired) | ||
| SDM-SIO4 (retired) | ||
| SDM-SW8A (retired) |
Additional Compatibility Information
This PROM allows the CR7 to be used with Synchronous Devices for Measurement (SDM).