The HUB-SDM8 is intended for customers who want to connect up to five external SDMs to the same datalogger, as well as run multiple power connections using 16 AWG wire. The HUB-SDM8 comprises an environmental enclosure with eight compression fittings (two larger) and eight terminal strips.
Read MoreThe HUB-SDM8 is intended for customers who want to connect multiple SDMs to the same datalogger, as well as run multiple power connections using a 16 AWG wire. The HUB-SDM8 is comprised of an environmental enclosure with eight compression fittings (two larger) and eight terminal strips. Up to five external SDMs can be connected to the HUB-SDM8's terminals.
Compression Fittings | 8 |
Terminal Strips | 3 spring-loaded guillotine connections per terminal (Two terminals in common through a jumper create 8 banks.) |
Dimensions | 17.78 x 20.32 x 12.7 cm (7 x 8 x 5 in.) |
Weight | 884.5 g (1.95 lb) |
Cabling |
|
Data Logger to HUB-SDM8 | CABLE5CBL-L connects the HUB-SDM5 to 12V, Ground, and control ports of the data logger. |
HUB-SDM8 to Individual SDM Devices | For each SDM, one CABLE5CBL-L cable connects the HUB-SDM8 terminal to 12V, Ground, and control ports. |
When the HUB-SDM8 is used as a peripheral in an SDM application, compatible data loggers are any that are SDM compatible.