hi everyone
i comeback to you for another thing
i collect data from a cr3000 datalogger all days.
but the week end i'm not in the office
so i need to create a schedule plan to collect the data automaticaly.
i have search the solution in te forum and i saw that i need to create a batch file for using with cora_cmd.exe
why not but i have not totaly understand how this software works.
so if we can help me using cora_cmd.exe, this will be cool.
while waiting to read you
françois
Francois,
In LoggerNet's Setup screen you need to set up a Scheduled Collection. Leave LoggerNet running on your computer over the weekend and it will automatically collect data on that schedule.
The first part of this tutorial shows setting up Scheduled Collection: http://www.campbellsci.com/19_1_9999_156
You do not need to collect the Public Table though unless you are running RTMC and showing real time data.
Hope this helps.
Janet
dear janet
thank you for your fast answer
i'm not yet familiar with loggernet beacause i still use PC208 and collect data with card still last year..
so i will test this and tell you if that work.
i have another question, so you said i must leave loggernet running but does it stay connected or only running
because another computer must connect on this station and if i stay connected all the time, that will be not works.
while waiting to read you
françois
If only scheduled collection is running then LoggerNet will connect to the datalogger, collect the data, then disconnect automatically. Make sure you are NOT connected via the Connect screen, shut it down, when you leave for an extended period of time.
Janet
hello
thanks a lot for your help
bye