Hello,
I'm trying to measure several Stations,
each equipped with a TDR100 and 3 SDMX50,
with a Datataker-Logger. I have only a terminalprogramm to send and receive the serial datas/commands.
--------------------
Can anybody give me a guide what to do,
for example:
--------------------
FIRST:
send "NGWA" to TDR, output to MS Excel, calculate the cablelength and 'initialize' the TDR with something like this:
send "SNP=2048, SPL=10 ...andsoon"
up to here: is this the right way get it working?
If the TDR is setup I want to measure now the right values:
SECOND STEP:
* choose Mux (this is already workin :-)
* send "GMO" for getting the moisture
Now I would repeat the steps for all 16 Sensors...
Can anybody help me please?
Thanks from Munic/Germany at 12°C in the sun..
Markus