Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

Clock issues...


Mavada Feb 7, 2011 07:30 AM

Loggernet TroubleShooter Network Analysis
7-2-2011 8:11:28

COM4: ComPort
Communication State is normal.
The COM Port connection is Prolific USB-to-Serial Comm Port (COM4).

PakBusPort: PakBusPort
Communication State is normal.
The Max Baud Rate is 9600. If directly connected to the computer, the baud rate may be increased to 115200.

CR1000: CR1000
Communication State is normal.
The PakBus Address is 1.
Scheduled to collect at 7-2-2011 8:11:18
Collection intervals passed with no data collected: 173
It has been 0d 0h 2m 53s since data has been collected.

Recent Communication Errors
Warn CR1000: 7-2-2011 8:10:45 | "transaction failure","timed out or resource error","check/set clock"
Warn CR1000: 7-2-2011 8:10:52 | "transaction failure","timed out or resource error","table poll - Public_Clone"
Warn CR1000: 7-2-2011 8:11:03 | "transaction failure","timed out or resource error","check/set clock"
Warn CR1000: 7-2-2011 8:11:10 | "transaction failure","timed out or resource error","table poll - Public_Clone"

* Last updated by: Mavada on 2/7/2011 @ 12:30 AM *

Log in or register to post/reply in the forum.