Hello, I have a datalogger CR1000, which this one operative in way of tests before being installed definitively. When de datalogger it is installed I would like to erase the old tables of dates but i don, t want to erase the confifuratation and the program. Which is the order to do it into the Loggernet.
thank you.
Connect to the logger using the Connect Program. Select the Station Status button. When this opens select the Table fill times tab, which shows the data tables in the logger and their sizes. Then either select individual tables or "select all". Then hit the Reset tables button. This will erase all data in the tables.
There is no mechanism to selectively erase data from the logger for a given date range, although you can collect data for given date ranges, using the Custom (collect) button in the Connect screen.
Ok Andrew!...thank you for the information.