Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

automatic RTMC data update problem

mortenx Dec 10, 2014 10:33 PM

I am using CR1000 and pc200w and rtmc pro

all seems to be ok but data is updated only when i press "start data collection" button in pc200,

but i want that data update is made automatically every second.. what seems to be the problem?

https://plus.google.com/photos/107875816092054954933/albums/5269244423700170689/6091338227350359970?banner=pwa&authkey=CM2srazFgMKfVA&pid=6091338227350359970&oid=107875816092054954933

jtrauntvein Dec 11, 2014 06:08 PM

PC200W is not designed to perform scheduled polling the way that LoggerNet does. Since you are using RTMC pro, if your CR1000 has an available TCP/IP connection, it is possible to set up an HTTP data source inside of RTMC and RTMC will poll the data directly from the datalogger.

jtrauntvein Dec 11, 2014 06:10 PM

PC200W is not designed to perform scheduled polling the way that LoggerNet is. Since you are using RTMC pro, if the CR1000 has a TCP/IP network connection available, it is possible configure your RTMC project with an HTTP data source and RTMC will poll the datalogger directly.

mortenx Dec 11, 2014 07:43 PM

So that RTMC pro without LoggerNet is useless?
But does PC400w have that scheduled polling function?

tmecham Dec 11, 2014 08:31 PM

RTMC Pro has an option to override polling. Go to the project menu -> Configure Override Scheduled Collection.

Then select your station, enable it, and set the poll interval to 1 second. Then when you are running the project in RTMC Run-time or when RTMC Pro has live data enabled, you should have data coming in at 1 second.

Log in or register to post/reply in the forum.