Can I use the CR1000 to monitor a 240V AC power supply?
What sensors would I use?
thx
http://www.campbellsci.com/acpower-instruction
http://s.campbellsci.com/documents/eu/case-studies/70csl_power_web.pdf
I had misread something on the website and need to correct my earlier post.
The CS11-L combined with the built-in ACPower instruction in the CR1000 would seem to be a good choice. You can download the instruction manual from the following link for the details.
https://s.campbellsci.com/documents/us/manuals/cs11-l.pdf
Split core transducers are available which would allow installation without the need to disconnect the wire being monitored.
The split core transducers are much more expensive, typically 3X that of the solid core version.
* Last updated by: rlwoell on 8/9/2014 @ 9:41 AM *
http://www.campbellsci.com/cs11
http://s.campbellsci.com/documents/us/product-brochures/b_cs11.pdf
I am using the AC power instruction and it works great.
www.curt-ingram.com
You can see it in action