Hello,
We have a remote station with a CR1000 that has connections both via a NL115 and a RF401 on SDC7 (transparent mode). The RF401 on this station seems to have stopped talking to any other nodes on the network. It is used to collect/relay data from other downstream loggers.
Is there anything I can do to try and remotely verify, reset or otherwise troubleshoot the operation of the RF401 connected to the CR1000? Again, I can reach the CR1000 via the NL unit on the TCPIP network.
Thanks
James
* Last updated by: JamesMc on 2/12/2014 @ 11:43 AM *