Hello,
I’m had using a callback connection with CR1000 to Windows LoggerNet, but now I changed the server to Linux LoggerNet.
The CR1000 with TCP Password don’t connect more in our server. In the log I’m getting this messages:
"9:50:09 AM","XXXXXX","F","PakBus/TCP Client Disconnected","XX.XX.XX.XX","4343","PakBus/TCP authentication failed","an invalid challenge authentication was received"
"9:55:07 AM","XXXXXX","F","PakBus/TCP Client Disconnected","XX.XX.XX.XX","4344","PakBus/TCP authentication failed","authentication timed out waiting for the challenge"
The CR1000 with no TCP Password connected normally.
The setup is the same in both servers.
My linux a openSUSE 12.2 (Mantis) (x86_64).
Have someone get this situation?
Best Regards,
Andre Joao Telocken.
I would verify that the password in the datalogger settings (accessed using devconfig) and the LoggerNet settings (accessed through the setup screen are exactly the same. I just tried connecting using LoggerNet on debian and saw no problem provided the passwords matched.
Hi,
Thanks for anwered me. See below my additional information:
I get a connection to the datalogger using the devconfig, with the IP address and the TCP Password.
I get the connection with the LoggerNet to the datalogger, when I start the connection from the LoggerNet, using IPPort -> PakBusPort. On IPPort I put the IP address and on PakBusPort I put the TCP Password.
But I can't use this option normally because the IP Address of the datalogger is dynamic and so I need to use the callback.
I had double check the TCP Password and on the LoggerNet and on the datalogger is the same.
Best Regards,
André João Telöcken.
Hi,
Thanks for anwered me. See below my additional information:
I get a connection to the datalogger using the devconfig, with the IP address and the TCP Password.
I get the connection with the LoggerNet to the datalogger, when I start the connection from the LoggerNet, using IPPort -> PakBusPort. On IPPort I put the IP address and on PakBusPort I put the TCP Password.
But I can't use this option normally because the IP Address of the datalogger is dynamic and so I need to use the callback.
I had double check the TCP Password and on the LoggerNet and on the datalogger is the same.
Best Regards,
André João Telöcken.