I'm trying to connect several A100LK anemometers to a CR10X data logger. Using the Short cut tool to help, but as there is no option for this type of meter, unsure of compatibility.
Any tips/ideas?
The A100LK and A100L2 are identical except that the A100L2 has an optional analogue output which can be used in locations where there are no pulse counters. Both are offered by Campbell Scientific Ltd (see the manual at ftp://ftp.campbellsci.com/pub/csl/outgoing/uk/manuals/a100lk_a100l2_jan06.pdf). In Short Cut if you select the "Program" pull-down menu and hover your mouse pointer over "Sensor Support" you can enable "Campbell Scientific Ltd." in the resulting sub-menu. After doing so you will find an A100L2 in the Meteorological \ Wind Speed & Direction folder on the Sensors screen in Short Cut.
* Last updated by: ChipsNSalsa on 6/25/2009 @ 1:23 PM *
Awesome! Thanks