Dear all,
Currently i have connected wavecom modem to my campbell scientific CR850 datalogger. It seems that i fail to connect to the modem at my server side. Could you please help to check my coding?
'CR800 Series
'Created by Short Cut (2.8)
'Declare Variables and Units
Public BattV
Public SEVolt
Units BattV=Volts
Units SEVolt=mV
'Define Data Tables
DataTable(Table1,True,-1)
DataInterval(0,60,Min,10)
Sample(1,BattV,FP2)
Average(1,BattV,FP2,False)
Average(1,SEVolt,FP2,False)
Sample(1,SEVolt,FP2)
EndTable
DataTable(Table2,True,-1)
DataInterval(0,1440,Min,10)
Minimum(1,BattV,FP2,False,False)
EndTable
'Main Program
BeginProg
SetStatus("RS232Power","True")
SW12(true)
SerialOpen (COMRS232,115200,0,0,100)
SerialFlush (COMRS232)
SerialOut (COMRS232,1,0,1,200)
SerialClose (COMRS232)
Scan(5,Sec,1,0)
'Default Datalogger Battery Voltage measurement BattV
Battery(BattV)
'Generic Single-Ended Voltage measurements SEVolt
VoltSE(SEVolt,1,mV5000,1,True,0,_60Hz,0.1,0)
'Call Data Tables and Store Data
If TimeIntoInterval (0,60,Min) Then
Delay(1,2,sec)
EndIf
CallTable(Table1)
CallTable(Table2)
NextScan
EndProg
Thank You.
Best Regards,
Chai