I am able to connect to the CR1000 over serial, but when I try to connect in device configuration over IP, I get this message:
"open failed","Address lookup failed","11001","no such host is known","11001","No such host is known."
In loggernet remote, I get:
Failure: 11/14/2012 15:18:27.210
transaction failure","unreachable destination","check/set clock
Failure: 11/14/2012 15:21:46.228
transaction failure","unreachable destination","check/set clock
Failure: 11/14/2012 15:25:05.243
transaction failure","unreachable destination","check/set clock
Failure: 11/14/2012 15:28:25.277
Open failed
Failure: 11/14/2012 15:36:40.829
unexpected socket close
Failure: 11/14/2012 15:36:41.832
Open failed
In device configuration, have input the IP address, subnet mask and gateway that were obtained through DHCP and were listed on the right side of the window. Loggernet Remote is also set up with the pakbus #, ip and other information.