Hello,
I could use some help setting up a Young 41372VC temp/humidity sensor on my CR10X using Short Cut. I used the generic measurements and the single ended voltage. The sensor is a 0-1 volt output, what do I choose for the Range of Sensor Voltage? My choices are 2.5mv, 7.5mv, 25mv, 250mv, and 2500mv. Then what would the multiplier be? The temp range is -50c/+50c.
I anyone can help I sure would appreciate it.
Thanks.
o, chose 2500 mV and multiplier is 0.1 and offset is -50.
Hey! Thanks a bunch.
Ken