Hi CS Support team,
Could you pl confirm , whether CS do provide calibration certificate for CS 215 At/RH sensor?
My customer is asking for for the same.
But unfortunately it has not come along with sensors.
Thanks
R Gupta
CS do not supply an individual certificate of calibration for the CS215. The sensor element itself is calibrated in an automated test rig by the manufacturers (Sensirion). They do not issue a calibration certificate for each element but do publish a statement on the calibration system, entitled "Calibration Certification", which outlines the path of traceability. The original can be found here:
http://www.sensirion.com/nc/en/products/humidity-temperature/download-center/?cid=885&did=227&sechash=e01c5021
This is reproduced in the back of the UK manual for the probe.
Depending on where you bought the probe you may be able to obtain a Certificate of Conformity for the probe. Some offices would be able to check the calibration of the probe and would provide a statement of calibration accuracy but this would be at extra cost.
* Last updated by: aps on 8/24/2012 @ 7:12 AM *