Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.

Auto connet & auto download data.

foxly May 24, 2012 06:26 AM

Dear Campbell

Want to LoggerNet automatically connect with automatically download data.

How do to setup?

Thanks Campbell.

jra May 24, 2012 02:12 PM

This is called "scheduled collection" and it is accessed through LoggerNet's Setup in the Main Category. The EZ View Setup Wizard will walk you through the steps. Or you can go through the Standard View. The Getting Started with RTMC tutorial https://www.campbellsci.com/19_1_9999_156 has a section on setting up scheduled collection through the Standard View.

I hope that helps. Let us know if you have questions.

Regards,
Janet

* Last updated by: Janet on 5/24/2012 @ 8:13 AM *

HidroAmoya Jan 22, 2015 07:41 PM

This is an example of the program to CR series dataloggers:

At the end of the program of datalogger you can chose the port to send the data table.

CallTable(Datos10m)
SendData (ComME,4094,4094,Datos10m)
NextScan
EndProg

(The ComMe ports means that you send data by radio modems / read the help menu of the CRBasic).

May also in the EZ Setup View schedule automatic data collection at specified intervals.

Regards.
Phillip.

Log in or register to post/reply in the forum.