Hi,
A couple of weeks ago I updated the program on a CR800. All I changed in the program was the multiplier for the rain gauge.
I normally communicate with the logger through a cellular modem. I haven't any communication issues in over 2 years. Since updating the program LoggerNet tells me that the table definitions are suspect, but despite numerous attempts it fails to update them successfully. I can hear the modem connecting to the logger when I dial in, so it's not a problem at that end.
I can still connect directly, view the readings and download data. In fact, I loaded the program by connecting directly because it failed when I tried to load it via the cellular modem. Could this be a clue as to the cause of the problem?
I appreciate any help in resolving this problem, as regular collection of the data is very important.
* Last updated by: galexioza on 2/29/2012 @ 12:44 PM *
What kind of "cellular modem" do you have at the datalogger?
A Wavecom Fastrack Xtend (GSM).
* Last updated by: galexioza on 2/29/2012 @ 5:11 PM *