| CR3000 lose serial number (and board rev number partially) |
Rene |
5 |
8/24/20 9:55 PM |
| data logger communication failure |
MJMagaji |
2 |
8/23/20 4:17 PM |
| CRBasic for HMP9 Vaisala humiity sensor |
VU.performance |
0 |
8/21/20 6:34 AM |
| CR1000x says “permission was denied by the station” |
Ferretkuo |
0 |
8/20/20 3:01 PM |
| Enable disable keyboard display backlight |
pokeeffe |
1 |
8/20/20 2:24 AM |
| TimeintoInterval Help |
Zpoole |
2 |
8/17/20 6:53 PM |
| Compile error |
Al_engineer |
0 |
8/15/20 4:34 PM |
| Averaging values every 15 minutes- Issue with data collection |
adhillman |
1 |
8/14/20 8:39 PM |
| Possible to use a terminal for DRY CONTACT TO GROUND? |
tonetics |
1 |
8/13/20 8:53 PM |
| 4 to 20 ma wiring detail |
GeodeNZ |
7 |
8/13/20 8:41 PM |
| Cr1000 communication via radio and gprs |
zamipufi |
0 |
8/12/20 2:56 PM |
| 12 strain gauge vibrating wire (Geokon Model 4100), and AM 16/32B Multiplexer and CR6 data loggers. |
#RD@2020 |
0 |
8/12/20 1:37 PM |
| Geo Precision SDI-12 converter |
--dd-- |
3 |
8/12/20 10:38 AM |
| reading status of CELL215 over CS I/O |
Chasper B. |
1 |
8/6/20 8:42 PM |
| schedule modem off and on |
n_maureira |
1 |
8/6/20 3:43 PM |
| Remote OS update via Connect screen |
ariklee |
1 |
8/3/20 2:50 PM |
| Numeric and text NANs in TOA5 file |
rwc |
10 |
7/31/20 9:01 PM |
| Rolling Averages |
BertSP |
3 |
7/31/20 2:26 PM |
| CR1000 vs CR1000X web interface |
LorenFiedler |
2 |
7/28/20 2:02 PM |
| can I put two different SDI-12 sensor types on one control port? |
furban |
1 |
7/28/20 10:52 AM |
| Electrical Resistance Strain gauge with 4 Wire |
chalit |
0 |
7/28/20 2:10 AM |
| EmailRelay- Email Daily data |
TLT |
2 |
7/23/20 1:08 AM |
| Remote Device Config Utility usage via loggernet LNLINUX |
Mike Voss |
1 |
7/22/20 10:31 PM |
| 10k Thermistor with CR1000X |
MattB |
2 |
7/22/20 10:25 PM |
| Modification in program using CR6 data loggers, 12 strain gauge vibrating wire (Geokon Model 4100), and AM 16/32B Multiplexer |
#RD@2020 |
0 |
7/22/20 5:00 PM |
| Soil moisture - SoilVue10 |
AndreasB. |
1 |
7/21/20 7:13 AM |
| Modification in program using CR6 dataloggers, 12 strain gauge vibrating wire (Geokon Model 4100), and AM 16/32B Multiplexer. |
#RD@2020 |
0 |
7/20/20 1:22 PM |
| RF451 network internals |
ariklee |
1 |
7/20/20 12:27 AM |
| thermistor program |
foxly |
3 |
7/17/20 5:36 AM |
| CR6 with Vibrating Wire Gage and Quarter Bridge Strain Gage of Another company |
dewan_001 |
2 |
7/16/20 4:58 PM |