FAQs Frequently asked questions about our products and solutions

Ask a Question Ask a Question

All FAQs (1922 total: showing 1761-1780)

What is the difference between an SC932A and an SC932?
Can a CR10X and an RF modem be wired directly without using an SC932A?
What is the best way to remove corrosion on the pins (inside and out) of the SC932A?
Will an SC932A provide what is needed to connect a datalogger to an Ethernet cable?
Does the SC932A come with any cables?
How can an SC932A be used to directly download data from a datalogger to a laptop in the field?
When a 4-way net radiometer is used, which dataloggers require the use of a 4WPB100 to measure the internal PRT?
How many 4WPB100s are needed to measure the internal PRT in an NR01-L, CNR4-L, or CNR1-L 4-way net radiometer?
What's new in VisualWeather 3.1?
Which protocol does the CR500 use to communicate with a modem?
If a CR500 is disconnected from its power source, does the datalogger keep the stored data in the flash memory, or does it erase the data definitively?
Can the CR510 manual be used to answer questions regarding a CR500?
How is the oxygen level in water controlled?
Which system would be most economical to monitor the water quality in fish ponds and prawn ponds?
Can the aquaculture systems be used for wastewater applications?
Can a SCADA system be put together using a CR10X, LoggerNet software, and RF401 radios?
If a DOS application requires bidirectional serial wireless communication to a nonintelligent data terminal, will a pair of RF401s work?
If RF401 is used with a CR10X datalogger to communicate with the RF401 on the computer side, can four different dataloggers with RF401 be used on the computer side, thus taking data from four different dataloggers and plotting at the same time?
What is the typical range for the RF411?
Is there a shelf-life for the CS511-L Dissolved Oxygen Probe?

Previous Next