Data cables physically connect two devices together to allow data to flow between the two devices. They may be used to connect a datalogger to a communications peripheral, a datalogger to a computer, a computer to a communications peripheral, or a communication peripheral to another communication peripheral.
The 31056 adapts an RS-232/CPI RJ45 port to a DB9 socket (female) connector. This cable is offered to make it easier to connect a DTE serial device, such as a computer or terminal server, to the RS-23...read more
The SC12 is our standard cable for connecting the data logger's 9-pin serial I/O port to most peripherals with a 9-pin port. It is supplied with many of our standard communications peripherals. ...read more
The SC12R-6 connects two or more 9-pin peripherals to the CS I/O port of a Campbell Scientific datalogger. The SC12R-6 may be "daisy-chained" to connect one additional peripheral with each additional...read more
This weatherproof cable is terminated with a D-sub 9-pin pin (male) (DE-9M) connector on one end and a D-sub 9-pin socket (female) (DE-9F) connector on the other. A typical use is to connect a sensor...read more
This weatherproof cable is terminated with a D-sub 9-pin pin (male) (DE-9M) connector on one end and a pigtail on the other. A typical use is to connect a sensor or peripheral with a DE-9F connection...read more
The 10873 is a serial cable that is useful for connecting the RS-232 port of the datalogger to the 9-pin RS-232 port of a computer. The cable is six feet long.read more
This 1 ft, null modem cable has 9-pin connectors on both ends for connecting the datalogger's RS-232 port to a peripheral's RS-232 port. An interface such as the SC105 or SC932A is typically not requi...read more
The 13657 null modem cable has DB9 socket (female) to DB9 socket (female) connectors. The length is 6 ft (2 m). This cable is commonly used with the NL100, SDM-CAN, and SDM-SIO4 peripherals.read more
The SC110 consists of two cables to connect a data logger with RS-232 DCE and DTE devices. One end of each cable provides stripped, tinned leads for attachment to the control ports on a CR800, CR850,...read more
The 17855 provides a convenient method for wiring a DB9 connection to a terminal block. One end of the cable is fitted with a DB9 pin (male) connector. The other end of the cable has stripped and tinn...read more
The 31055 adapts an RS-232/CPI RJ45 port to a DB9 pin (male) connector. This cable is offered to make it easier to connect a DCE serial device, such as a cellular modem, to the RS-232/CPI port. ...read more
This interface is a socket (female) fitting that allows wiring of a serial device with stripped and tinned leads to a serial port. A protective hood for the fitting is included.read more
This interface is a pin (male) fitting that allows wiring of a serial device with stripped and tinned leads to a serial port. A protective hood for the fitting is included.read more
The 17394 is a six-foot interface cable fitted with a USB connector on one end and a 9-pin pin (male) RS-232 connector on the other end. The USB connector attaches to the USB port of a PC. The RS-232...read more
The 7026 is a molded, jacketed, serial cable. It is typically used to connect Campbell Scientific interfaces with 25-pin serial connectors (e.g., SC32A, SC532A, SC932A) to a computer with a 9-pin seri...read more
The 27555 is a 6 ft USB Type A to Micro B cable. It connects devices using the Micro B interface to a USB port on a computer. The 27555 is shipped with the NL200 Network Link Interface. The 27555 may...read more
The 28898 is a 6 in., unshielded, CAT6 network cable with RJ45 connectors. It is typically used to connect CDM devices together or to an SC-CPI. This cable is also used to connect one of our many Ethe...read more
The 28899 is a 2 ft, unshielded CAT6 network cable with RJ45 connectors. It is typically used to connect CDM devices together or to an SC-CPI. This cable is also used to connect one of our many Ethern...read more
The 28901 is a 50 ft, unshielded, CAT5e cable with RJ45 connectors. It is typically used to connect CDM devices together or to a datalogger. This cable can also be used to connect one of our many Ethe...read more