CSAT3BCBL2-L Power-Only Cable for CSAT3B

Overview

The Power-Only Cable CSAT3BCBL2-L is used to deliver power to a CSAT3B that will use CPI, USB, or RS-485 communications instead of SDM communications. The -L denotes the length of cable in feet. One end of the cable always has a 6-pin M16 connector that mates with the Power/SDM port on the back of the CSAT3B block. The other end of the cable has the following two options:

  • The -PT option specifies the cable end to have pigtail wire leads for connecting to a 12 to 32 Vdc power supply.
  • The -MC option specifies the cable end to have an M16 connector, which can be used to connect to a 30293 Power/SDM Splitter, in the case of a network of CSAT3B anemometers daisy-chained in series.

If SDM communications may be used at some point in time, the CSAT3BCBL1-L should be ordered instead of the CSAT3BCBL2-L. For CPI and RS-485 communications, a CSAT3BCBL3-L cable should be ordered in addition to the CSAT3BCBL2-L.

Images