RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.
CR9032 CR9000X CPU Module
Services Available
Repair Yes
Calibration Yes
Free Support No

Overview

The CR9032 is a 32-bit CPU module that can replace the CR9031 module in an older CR9000 to upgrade it to a CR9000X. As the CPU module in a CR9000X Modular Measurement and Control System, it provides system control, data processing, and communications.

Read More

Benefits and Features

  • Upgrades older CR9000 systems to CR9000X standards

Images

Technical Description

The CR9032 is what differentiates the CR9000X-series dataloggers from the CR9000-series dataloggers, which used the CR9031 CPU Module. The CR9032 supports a measurement rate of up to 100,000 Hz, provides a 180 MHz clock speed, and adds a built-in RS-232 port, 10baseT/100baseT port, CS I/O port, and PC-card slot. The built-in ports enable communication without using the special interfaces (e.g., PLA100, TL925,  NL105) that were required for the retired CR9000-series dataloggers.

The PC-card slot allows the datalogger to store data on a Type I, Type II, or Type III PCMCIA card, or on a CompactFlash® card if an adapter is used. The CR9032 CPU Module may be ordered as a separate item to upgrade a CR9000-series datalogger to a CR9000X-series datalogger.

Specifications

-NOTE- Additional specifications are listed in the CR9000X(C) Specifications Sheet.
Processors 180 MHz Hitachi SH-4
Memory 128 MB of internal SDRAM for program and data storage. Expanded data storage with PCMCIA type I, type II or type III cards or CompactFlash® cards with an adapter.
Serial Interfaces RS-232 9-pin RS-232 DCE port for computer or modem. CS I/O 9-pin port for CSI peripherals and SDM devices.
Ethernet Interface 10baseT/100baseT port for communications over a local network or the Internet

Compatibility

The CR9032 is included in the CR9000X and CR9000XC. It can replace the CR9031 CPU module in a CR9000 or CR9000C.