COAXSMA LMR195 Antenna Cable with SMA and Type N Pin (Male) Connector

Overview

The COAXSMA is an LMR195 coaxial cable fitted with a Type N pin (male) connector on one end and an SMA connector on the other end. This cable is commonly used to connect an antenna with Type N connector to a cellular or spread-spectrum radio with an SMA connector.

Read More

Images

Technical Description

The COAXSMA is an LMR195 coaxial cable fitted with a Type N pin (male) connector on one end and an SMA connector on the other end. The cable has a UV-resistant polyethylene jacket, which with proper installation and care, is designed for 20 years of outdoor use. 

Specifications

  • Cable Type: LMR195
  • Connector 1: Type N male plug
  • Connector 2: SMA male plug
  • Bend Radius: 1.27 cm (0.5 in.)
  • Weight: 0.021 lb/ft
  • Operating Temperature Range: -40° to +85°C
  • Impedance: 50 ohm
  • Attenuation db/100m (db/100ft) @ Frequency:
    • 14.6 (4.4) @ 150 MHz
    • 25.5 (7.8) @ 450 MHz
    • 36.5 (11.1) @ 900 MHz
    • 62.4 (19.0) @ 2.4 GHz

Maximum Cable Length*

  • RF450 Radio: 3 m (10 ft)

*If a longer cable length is required, use a COAXNTN-L cable with the 19533 surge suppressor instead of the COAXSMA.

Compatibility

The COAXSMA is compatible with any device requiring a Type N to SMA cable with an impedance of 50 ohm. The COAXSMA is often used with Campbell Scientific cellular modems and the RF450 spread-spectrum radio.

Related Documents