Precipitation Sensor Mounts / CM100
RETIRED ›
This product is no longer available and has been replaced by: CM240. Some accessories, replacement parts, or services may still be available.
This product is no longer available and has been replaced by: CM240. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The CM100 was intended for the CS700 and TB4 tipping bucket rain gages. It required a piece of threaded, 1.25 IPS pipe (1.66" OD) that was secured to the ground. The pipe needed to be long enough to place the gage's orifice at a one-meter height. A concrete pad was recommended.
Read MoreImages
Related Products
Technical Description
The CM100 was used to mount the CS700 and TB4 tipping bucket raingages. It required a piece of threaded, 1.25 IPS pipe (1.66" OD) that was secured to the ground. The pipe needed to be long enough to place the gage's orifice at a one-meter height. A concrete pad was recommended.
Compatibility
The CM100 can be used to mount a CS700, CS700H, TB4, and TB4MM tipping bucket raingage. It is not compatible with other raingages.