CC5MPX(WD) Accessories / CC5MPXPWRCBL-L
CC5MPXPWRCBL-L CC5MPX Power and I/O Cable

Overview

The CC5MPXPWRCBL-L cable connects the camera to the power supply and is required to use the camera. This cable can also connect the camera to a datalogger COM port, MD485, or PC.

Read More

Images

Technical Description

The CC5MPXPWRCBL-L cable connects the camera to the power supply and is required to use the camera. This cable can also connect the camera to a datalogger COM port, MD485, or PC.

Connection to the PC allows the camera to be configured via the Device Configuration (DevConfig) utility. To use DevConfig requires the DB9M-TERM or A200 interface. The DB9M-TERM interface is shipped with the CC5MPX camera.

Specifications

  • Cable Type:

24-AWG 3 pair (6 conductor)

Individually Shielded Cable with Santoprene Jacket

  • Connector: 

6-Pin Environmental 

  • Maximum Length 30 Meters (100 feet)

Related FAQs

Number of FAQs related to CC5MPXPWRCBL-L: 1

  1. Is there a cable option for the CC5MPX that can interface to a cellular modem?
    This is done by sending images via PakBus to a Campbell Scientific datalogger with a cellular modem telemetry option. The cable that is used is the CC5MPXCBL1-L Power and I/O Cable, which provides power from the datalogger, as well as an RS-232 or RS-485 connection.
Visit the FAQ Library

Listed Under

Common Accessory for the following products: