Image Not Available

Overview

The 31551 is a kit to allow stacking of components inside Campbell Scientific enclosures. The kit includes two leg brackets. It is used to raise a data logger up and off the backplate so that wiring is easier or so that components can be stacked. The brackets raise a data logger (or other module) off the back panel by approximately 7.62 cm (3.0 in.).


Specifications

Bracket Length 10.16 cm (4.0 in.)
Bracket Height 7.52 cm (2.96 in.)
Weight 90.72 g (0.2 lb)

Compatibility

The 31551 does not fit inside the ENC10/12. If the ENC10/12R is used, it must be oriented with the hinge toward the top or bottom.