RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.
25458 5 in. DIN Rail Mounting Kit
Services Available

Overview

The 25458 can facilitate wiring when many wires need to be connected to one terminal. This kit contains one 15906 5 in. DIN Rail Mounting Bracket, two 505 screws, two 6044 grommets, and two 15908 DIN Rail Stoppers. A complete configuration would also include terminal strips, end plates, and jumpers.

Read More

Images

Related Products

Technical Description

The 25458 can facilitate wiring when many wires need to be connected to one terminal. This kit contains one 15906 5-inch DIN Rail Mounting Bracket, two 505 screws, two 6044 grommets, and two 15908 DIN Rail Stoppers. A complete configuration will also include pn 15920 Terminal Strips, pn 15907 End Plates, and pn 15909 Jumpers (see Ordering Info). The stoppers, terminal strips, and end plates are mounted onto the DIN rail bracket. The DIN rail bracket is mounted to an enclosure backplate using the kit’s screws and grommets.

The 25458 is often used in RWIS applications, and is ideal for connecting multiple 4 to 20 mA sensors to a CR200(X)-series datalogger.

Specifications

Hardware Type DIN rail mounting kit
Why/When to Use For connecting many wires to one terminal.
Mounting Bracket Length 12.7 cm (5 in.)
Mounting Space to Hold Parts 10.1 cm (3.98 in.) Can connect up to 33 items depending on width of items.
Weight 68.04 g (0.15 lb)

Compatibility

The 25458 can be used in any of our enclosures.


Related FAQs

Number of FAQs related to 25458: 2

  1. If a system has multiple CS650-L or CS655-L sensors, it will be necessary to connect many wires to a 12 V supply and many wires to ground. The DIN-Rail Mounting Kit is useful for attaching many wires to the same source in a clean and organized way. For more details, see the 5458 DIN-Rail Terminal Kit instruction manual

    Other methods of connecting several wires together, such as terminal strips or wire nuts, would also work.

  2. The 25458 5-inch DIN-Rail Mounting Kit can be used when many wires need to be connected to one terminal. Another option is to use a wire nut to gang multiple wires together and to run one pigtail to one of the datalogger control ports.

Listed Under

Replacement Part for the following products: