RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.
06201 RM Young Wind Tracker - Wind Speed/Direction Display
Services Available

Overview

Wind speed is displayed in your choice of units: kph, m/s, mph, knots. Maximum wind speed is saved on the display until reset by the operator. Wind direction information is clearly displayed on a circular pattern of LEDs. Bold front panel graphics give a quick indication of wind angle. Brightness control allows adjustment for best viewing in any light. Luminous front panel markings allow viewing even in a darkened pilothouse.

Read More

Images

Technical Description

The Wind Tracker may be mounted from a bulkhead or installed in a flush panel by removing the mounting bracket. An optional rack mounting panel (Model R06280) and protective enclosure (Model R06260) are available. The Wind Tracker will display a software version number for approximately 4 seconds. It will then begin to display wind information. The following information is displayed:

• Wind Speed

• Wind Speed Units

• Maximum Wind Speed or Direction degrees

• Wind Direction (single orange indicator)

• Direction Variability (green indicators)

• WS, WD Alarm Status Indicators (If selected)

• Data Averaging Indicator (If selected)

Specifications

  • Wind Speed Range: 0-50 m/s, 0-200 km/h, 0-100 mph, 0-100 knots
  • Wind Direction Range: 0-360 degrees, 36 points
  • Display Resolution:
    • Wind Speed & Maximum: 1 unit (0.1 m/s only)
    • Wind Direction: 10 degrees (36 points circular), 1 degree (digital display mode)
  • Compatible Sensors: 05103 Wind Monitor 05106 Wind Monitor-MA, 05305 Wind Monitor-AQ, 09101 Wind Monitor- SE, 04101 Wind Monitor-JR, 12005 Wind Sentry, 81000 Ultrasonic Anemometer
  • Other Inputs: RS-485 4-20 mA
  • Voltage Outputs: 0-5 VDC Full Scale for WS & WD Alarm
  • Relays: Normally Open contacts for WS & WD
  • Contact Rating: 5A resistive, 2A inductive @ 24 VAC, 30 VDC
  • Remote Displays: Up to 16 remote displays can be connected in parallel
  • Power Requirement: 12-30 VDC, 4.5 W
  • Dimensions: 144 mm (5.65 in) x 144 mm (5.65 in) x 36 mm (1.4in)
  • Panel Cutout: 138 mm (5.43 in) x 138 mm (5.43 In) 
  • Weight: 0.4 kg (1 lb)

Related Documents